Offshore Engineering

An Interactive 5-Day Training Course

Offshore Engineering

Design, Fabrication, Installation, Hook-up and Commissioning

NASBA
Classroom Schedule
Date Venue Fees
01 - 05 Jun 2026 Abu Dhabi $ 5,950
28 Sep - 02 Oct 2026 Dubai $ 5,950
Online Schedule
28 Sep - 02 Oct 2026 Online $ 3,950

Introduction

The Oil and Gas industry have offshore design engineering and construction projects as well as maintenance services which are technically and commercially challenging therefore good knowledge and competency of the project team members throughout the different phases of works are keys to the successful execution of these projects. This training course aims to provide the participants with comprehensive foundation knowledge of Offshore Engineering.

This Offshore Engineering training course starts with an introduction of Field Development Planning (FDP) and Project Management, followed by design engineering, procurement, substructures and topsides fabrication, load-out and sea transportation, offshore installation, hook-up, commissioning, and start-up. An overview of the major and support marine vessels, cranes and pipe-laying equipment will also be described. This training courses places particular emphasis on the principles and steps of the works, using engineering calculations, flowcharts and diagrams to enhance the learning experience of the participants. Relevant international and typical client engineering standards will be referred to. Rules of thumb, engineering formulas, flowcharts and diagrams will be used to illustrate the principles and steps required for each part of the work. Real-life project examples as well as video clips will be used to demonstrate these offshore engineering activities and to aid the familiarisation and learning of the participants.

With a good foundation knowledge of offshore engineering, it is hoped that the participants will be better prepared to function in the design engineering, fabrication and construction department, offshore installation, hook-up, commissioning and start-up of offshore projects. Such roles include field and discipline engineers, project engineer, cost estimating engineers, fabrication contract admin executives, CSR, construction supervisors and engineers, or fabrication engineer. This Offshore Engineering training course will also be useful for university lecturers who wish to supplement their teaching materials and theoretical knowledge with real-life domain or practical knowledge of offshore engineering competencies and skills in pursuit of their CPD certification with Institution of Engineers at their respective countries.

This GLOMACS Offshore Engineering training course will feature:

  • Overview of field development planning (FDP) and project management
  • Design engineering process, deliverables and flowchart
  • Fabrication techniques such as cutting and welding, blasting and painting
  • Erection and assembly techniques, including cranes and lifting techniques
  • Load-out techniques, preparations and ballasting
  • Sea-fastening engineering and implementation
  • Major and support marine vessels, major installation equipment
  • Structure and topsides installation techniques
  • Pipelaying and riser installation activities
  • Subsea installation and diving support activities
  • Hook-up workpack process and execution
  • Mobilisation of marine vessels, construction crew, marine crew and construction equipment
  • Hook-up activities for each engineering discipline
  • Commissioning activities, start-up and handover to client

Objectives

By the end of this  training course, participants will be able to:

  • Understand what entails in Field Development Planning (FDP) and project management
  • Understand the complexities of Offshore Engineering activities
  • Appreciate the complete metamorphosis of Offshore Engineering –from the  Design phase till the Commissioning and Start-up phase
  • Understand Fabrication, Erection, Loadout and sea-fastening implementation at Fabrication yards
  • Understand the selection of the major support marine vessels and major installation equipment for offshore installation works
  • Fully understand the structure and topsides installation techniques
  • Understand what is involved in Pipelaying and riser installation works & Subsea installation and diving support activities
  • Fully understand what are involved in mobilisation of marine vessels, construction crew, marine crew and construction equipment
  • Understand the scope of work for hook-up and commissioning activities

Training Methodology

This Offshore Engineering training course will be conducted in a classroom. Examples and video clips of past offshore fabrication and load-out activities, as well as offshore installation activities will be used to aid the learning and understanding of the subject matters. Participants will also take part in group classroom exercises to reinforce their learning experience. Each participant will receive a set of training course materials. There will also be pre-seminar as well as post-seminar assessment tests.

Who should Attend?

This GLOMACS Offshore Engineering training course is suitable to a wide range of professionals but will greatly benefit:

  • Field Engineers, CSRs, Construction Supervisors, Project Engineers
  • Operations Engineers
  • Workpack Engineers
  • Structural Engineers
  • Metocean Engineers
  • Pipeline Discipline Engineers
  • Subsea Equipment Engineers
  • Various Discipline Engineers (structural, piping, equipment, electrical, instrumentation)
  • Maintenance Engineers
  • Contract Admin, Buyers and Procurement Executives
  • Cost Estimating, Project Control and Planning Engineers
  • Diving and Diving Support Personnel
  • Managers and Executives who are new to Offshore engineering projects
  • Other Engineers and Technicians who need to update their current Oil and Gas industry experience and wanting to move to Offshore Field development Projects
  • University Engineering Lecturers who wish to be CPD-certified by Institution of Engineers (IEM) at their respective countries
Course Outline
Day 1

Field Development (FDP), Project Management and Design Engineering

  • Pre-course Assessment Test
  • Course Learning Objectives vs. Course Participants’ Expectations
  • Overview of Field Development Planning (FDP)
  • Project Management Team (PMT), Roles and Responsibilities
  • Contracting, Subcontracting and Procurement Activities
  • Design Engineering Process, Deliverables and Flowchart
  • Health, Safety, Environment and Security Requirements, including training requirements and qualifications of personnel
  • Emergency Response Procedure (ERP)
  • QAQC Requirements, Documentation and Drawings Controls
Day 2

Fabrication and Onshore Construction

  • Fabrication Yard Layout, Load-out Methods, Workshops and Major Equipment Types, Foundation Preparation and Preliminary Works
  • Planning and Schedule, Fabrication Cost-Time-Resource (CTR) Estimating
  • Fabrication, Erection and Assembly of Major Structures, Substructures: Topsides and Living Quarters
  • Pipeline Procurement, Concrete Coatings, Pipeline Load-out and Transportation
  • Welding and Welder Qualifications
  • Blasting and Painting Activities: Testing and Inspection Requirements
  • Typical Manpower and Fabrication Equipment Planning and Management
  • Skid and Packaged Equipment Procurement, Factory Acceptance Testing (FAT), Delivery, Storage and Preservation and Installation
  • Weight Control and Weighing of Structures in Fabrication
  • Yard Pre-commissioning Activities
  • Jacket Commissioning, Trial Fitting and Ship Loose Items Management
  • Pile and Conductors Make-up and Fabrication, Transportation Arrangement Consideration and Load-out
  • Load-out Planning, Engineering for Substructures and Topside, and Load-out Execution, Ballasting Techniques and Calculation
  • Insurances, Commercial and Warranty Surveys
Day 3

Offshore Facilities, Pipelaying and Subsea Installation I

  • Offshore Transportation and Installation Phases, including Planning and Scheduling
  • Major and Support Marine Vessels, Major Equipment Types
  • Offshore Installation Considerations, Engineering and Calculations
  • Weight Control and Onshore Weighing Reports of Structures
  • Transportation Analysis and Sea-fastening
  • Launching, Lifting and Installation of Substructures
  • Upending of Substructures
  • On-bottom Stability, Pile and Conductor Make-up, Piling and Grouting of Substructures
  • Lifting Analysis of Topsides and Modular Topsides Construction
  • Float Over of Integrated Topside Deck
  • Geotechnical and Geomatics Surveys
  • Anchor-pattern Preparation and Approval
Day 4

Offshore Facilities, Pipelaying and Subsea Installation II

  • Vessels Availability, Contracting and Procurement Activities and Considerations
  • Cost-Time-Resource (CTR) estimating for Transportation and Installation
  • IPOP and Pre-execution Reviews
  • Mobilisation Preparations
  • Insurances, Commercial and Warranty Surveys
  • Metocean Activities and Installation Window Considerations
  • Substructures Installation - launching, lifting, self installation & novel methods
  • Topsides Installation - modular lifts, float-over and novel methods
  • SIMOPS Considerations for Offshore Installations
  • Pipeline and Riser Installation
  • Reel Pipelines and Umbilicals Laying
  • Subsea Equipment Installation and Diving Support Activities
  • Insurances, Commercial and Warranty Surveys
Day 5

Hook-up Construction and Commissioning (HuCC)

  • HuCC Project Planning and Scheduling, Monitoring and Reporting
  • Workpack Process and Execution
  • Procurement - cost-plus and overheads
  • Construction and Marine Crew Manpower Recruitment and Mobilisation
  • Onshore Minor Fabrication
  • Mobilisation of Major and Support Marine Vessels
  • Overview of Marine Operations
  • Onshore Supply Base and Load-out Activities
  • Logistics Support Activities
  • Hook-up Activities, namely blasting and painting, cutting, fitting and welding, piping and piping supports, platform appurtenances, electrical and instrumentation works
  • Pre-commissioning Activities, Hydrotesting, NDT and Inspection
  • Commissioning Activities and Dossiers
  • Start-up (first oil, first gas), Hand-over and Punch-list Items
  • Post-project Activities, Final Documentation, Change-order and Variation Orders, Lesson Learnt Database and Dissemination
  • Course Summary
  • Post-course Assessment Test
Certificates
  • On successful completion of this training course, GLOMACS Certificate will be awarded to the delegates. Continuing Professional Education credits (CPE): In accordance with the standards of the National Registry of CPE Sponsors, one CPE credit is granted per 50 minutes of attendance.
Providers and Associations

Endorsed Education Provider

KHDA
NASBA

In Association With

Frequently Asked Question:

GLOMACS offers both online andperson training options. You can choose from interactive virtual sessions or attend one of our globally locatedperson training courses. The flexibility ensures that learning fits your schedule and preferences.
Yes, GLOMACS provides customized training solutions tailored to meet the specific needs of organizations. We work closely with companies to design bespoke training courses that address their unique challenges and objectives.
Our courses are structured to provide a balanced mix of theory and practical application. They typically include presentations, case studies, group discussions,on activities, and interactive Q&A sessions to maximize learning outcomes.
For detailed information about specific courses, including course content, schedules, and instructors, you can visit our website or contact our customer service team. They will be happy to provide all the information you need to make an informed decision.
You can register for a GLOMACS training course by visiting our website, selecting the course of your choice, and following the simple registration process. You can also contact our support team for assistance with the registration process.
Attending a GLOMACS training course offers numerous benefits, including enhanced professional skills, increased employability,recognized certification, networking opportunities with peers and experts, and the chance to apply practical knowledge directly to your workplace.
GLOMACS is a globally recognized leader in professional training and development, with a reputation for deliveringquality,driven training courses. We offer a broad spectrum of training courses taught by expert trainers, flexible delivery options (both online andperson), and accredited certifications that add real value to your career.

Yes, upon successful completion of any of our training courses, GLOMACS Certificate will be awarded to the delegates. This certificate is a valuable addition to your professional portfolio and is recognized across various industries.

Options & Brochure
You may also be interested in...
Understanding the Global Petrochemical Industry
09 - 13 Feb 2026
map Dubai
$5,950
View Course
Rigging Slinging
14 - 18 Sep 2026
map Dubai
$5,950
View Course
Laboratory Analysis for Oil and Gas Production
Crude oil & Natural Gas Analysis
17 - 21 Nov 2025
map London
$5,950
View Course
Petroleum Products Trader
Managing Crude Oil and Refinery Products Trading, Marketing, and Hedging
17 - 21 Nov 2025
map London
$5,950
View Course
Advanced Seismic Interpretation
Application to E&P and other Industries
24 - 28 Nov 2025
laptop Online
$3,950
View Course
Fractured & Unconventional Reservoir Modelling
From Rock Mechanics to Reservoir Optimization
24 - 28 Nov 2025
map Dubai
$5,950
View Course
Integrated Reservoir Modeling
Interpretation Evaluation, and Optimization with Petrel
24 Nov - 05 Dec 2025
map Dubai
$11,900
View Course
Advanced Oil and Gas Process Engineering
Advanced Oil and Gas Process Plants Optimization and Efficiency Improvement
10 - 14 Nov 2025
map London
$5,950
View Course
Glomacs Training
GLOMACS Training & Consultancy
Typically replies within an hour
Olivia
Hi there 👋
My name is Olivia. Please tell me how I can assist you..
17:59